XY-TAS-01

XY-TAS-01

XY-TAS-01
Inclination sensor

1 axis

Non-programmable device

Output: 4 – 20 mA

horizontal/vertical mounting

Measuring range

± 30°

 
 General specifications

 

Housing Alufer housing
Dimensions (indicative) 30x30x15 mm
Mounting Included: 2x M3x16 mm zinc plated steel pozidrive pan head screws, self-tapping (PZ DIN 7500CZ)Mounting on flat surface only. Screw with maximum Torque 1,5 Nm
Ingress Protection  (IEC 60529) IP67
Relative humidity 0 – 95% (non condensing, housing fully potted)
Weight approx. 20 gram (cable excluded)
Supply voltage 10 – 30 V dc
Polarity protection Yes
Current consumption ≤ 4 mA ( excluding output signal )
Operating temperature -40 .. +70 °C
Storage temperature -40 .. +80 °C
Measuring range ± 30°
Centering function No
Frequency response (-3dB) 0 – 5 Hz (±2,5 Hz)
Accuracy (overall @20°C) 0,2° typ. (offset excluded)
Offset error ± 1° typ.   (± 1.5° 2σ)
Non linearity ± 0,2° typ
Sensitivity error ± 2% typ., Repeatability 0.1°
Resolution 0,01°
Temperature coefficient ± 0,01°/K typ
Max mechanical shock 3.500g
Output 4 – 20 mA
Output load Rload ≤ (50*Vs -300) (Ω)  (Eg: Vs = 24 V: Rload ≤ 900 Ω)
Short circuit protection Yes (T<55°C), Max 10 s (T>55°C)
Output refresh rate continuous (analog)
Programming options not applicable

 

 

 

XY-TAS-01

  Transfer characteristic
Iout = 12 + 16*(sin(α) [mA]

Outside measuring range sensor

transfer formula is valid until clip

level of approximately 2.5mA & 22.5mA

 

 

  Measurement orientation
The EV-TAS-01 can be used in both

vertical and horizontal mounting position.

  Connectivity (cable length ±2%)
Connection 0.75m PVC/PVC ash Ø3.5 mm, wires: 3×0,16 mm² Sensor colors (static usage)
Connector TE 282105-1
Wire / pin coding/ Connector pin Red + Supply Voltage 2
Yellow Output 3
White Gnd 1
  Mechanical dimensions (indicative only)
 
  Remarks
  As this device is accelerometer-based the sensor is inherent sensitive for accelerations/vibrations.

 

Key Features

Technical Specifications

Case Study

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Full-process Solution for Mineral Grinding

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Why Choose CITIC HIC's Grinding Mills
  • High cost-effectiveness
    CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology.
  • High operating rate
    The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques.
  • Low-carbon & environmental-friendly processes
    Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations.
  • High-efficiency service
    Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.

Do you have any questions?

Other Products

Scroll to Top